The model HCB valves are widely applicable for reliable control of high or low temperature, high pressure or high differential pressure process lines where dynamic stability, low noise, and cavitation/flashing resistance are required. SPECIFICATIONS Body Type: Straight-through, cast globe valve Nominal size: 1-1/2’’, 2’’, 2-1/2’’, 3’’, 4’’, 6’’, 8’’  Pressure rating: • JIS 10K, 16K, 20K, 30K, 40K • ANSI Class 125, 150, 300, 600 • JPI Class 125, 150, 300, 600 End connection • Flanged end(FF, RF, RJ, LG) • Welded end: SW (1-1/2, 2 inches), BW (2-1/2 to 8 inches) Material For body/trim material combinations and operating temperature ranges, refer to Table 1 . Bonnet • Plain bonnet (-17 to 230 °C) • Extension bonnet type 1 (-45 to -17 °C and 230 to 566 °C) • Extension bonnet type 2. Integral cast type (-100 to -45 °C), Welded type (-196 to -100 °C) • Bellows type For operating temperature and pressure range, refer to Figure 3. Note) Take care not to exceed the operating temperature ranges specified for respective materials. Gland type: Bolted gland Packing / Grease • Grease not provided When V-shaped PTFE packing or PTFE yarn packing is used. • Grease provided: When graphite packing is used. Gasket Type: Combination of serrated type and spiral wound type(integral cage), Serrated type (split cage) Material Stainless steel (SUS316, SUS316L, SUS329J1), copper, aluminum www.valve-cn.com